How to use small concrete mixer without wear parts

During the use of small concrete mixers, parts wear is a frequent problem. During the use of mechanical equipment, mechanical dynamics are caused by wear and corrosion of parts, reduction or deterioration of lubricating oil, loosening or displacement of fasteners, etc. Reduced economic and safety reliability. Jianxin Machinery recommends that everyone take the following measures to reduce wear and ensure stable production.

Clean
Cleaning means that all parts of the commercial concrete mixing station are required to be free of sludge, dirt and dust, especially the cleanliness of the surface of the motor and the gearbox to ensure the normal heat dissipation of the machine.
Fastening
The fastening is to check and fasten the joints of the various parts of the commercial concrete mixing station. The vibration generated during mechanical operation is easy to loosen the connecting parts. If it is not tightened in time, it may not only cause oil leakage, air leakage, water leakage, leakage, etc., but also loose bolts in some key parts, which will also change the force distribution of the original design parts. In the case of light, the parts are deformed, and the parts are broken and separated, resulting in mechanical failure due to malfunction of the operation.
Adjustment
The adjustment is to check and adjust the relative relationship and working parameters of many parts of the commercial concrete mixing station machinery in time to ensure the normal operation of the machine. In particular, the flexibility and reliability of key components must be adjusted to prevent accidents.
Lubrication
Lubrication is to regularly fill or replace the lubricant according to the specified requirements, in order to maintain good lubrication between mechanical moving parts, reduce parts wear and ensure the normal operation of the machine.
Protection
Protection is to prevent moisture, rust, acid and corrosion of mechanical concrete parts and electrical equipment. In particular, the mechanical appearance must be painted or coated with anti-corrosion materials such as grease. Technical knowledge exchange is welcome to contact Jianxin Machinery.

<< Previous：Which stable soil mixing plant production equipment is efficient
<<  Next：Does dry powder mortar production equipment required for electricity consumption?