Stabilize the soil mixing station equipment switch machine sequence

There are sequential requirements for the stabilized soil mixing plant equipment to start or shut down, which is easy for many operators to ignore. The order of starting up is: mixer, inclined belt conveyor, flat belt conveyor, No. 1 feeder, No. 2 feeder, No. 3 feeder, No. 4 feeder, No. 5 feeder. The shutdown sequence is: No. 1 feeder to No. 5 feeder, first shut down at the same time, then delay the shutdown in the order of flat belt conveyor, inclined belt conveyor and mixer.
There are many parts for stable soil mixing station equipment, so the daily maintenance and stability of the soil mixing station is best carried out under the guidance of professionals. Jianxin Machinery made a simple technical summary for everyone:

1. Check whether the solid parts of the stabilized soil mixing station are reliable.
2. Handle the rotating parts of the stabilized soil mixing station by hand to check whether the rotation is flexible and whether there is a card issuance.
3. Check whether the lubricating oil of each speed reducer of the stabilized soil mixing station is added to the specified capacity and lubricate the lubrication points.
4. Check if the connection of each line connector in the stabilized soil mixing station console is loose.
5. Check the opening and closing of the door opening mechanism of each belt feeder of the stabilized soil mixing station. The whole process should be adjusted without jamming, and the belt runs smoothly without any movement. Check whether the automatic control device of the silo vibrator is sensitive and the speed is reliable. The screw conveyor should run smoothly and be reliable. The positioner is responsive and reliable.
6. Check the working condition of the water supply system of the stabilized soil mixing station: carry out the whole process adjustment, observe the working condition of the water spray pipe and the flow meter, and be sensitive. Check the joints of the pipes and valves should be sealed reliably and without leakage. .
7. The operation of the stirrer of the stabilized soil mixing station should be stable and there is no jamming.
8. The operation of the aggregate and conveying belt conveyor of the stabilized soil mixing station should be stable, and the deviation should be within the specified range. For more technical knowledge exchange, please continue to pay attention to this site update.

<< Previous：How to achieve environmental protection in an environmentally friendly concrete mixing plant?
<<  Next：Analysis of the working process of small concrete mixing plant